Medical kiosks touchscreen touch time, although there are reflected, but is not correct, there will be a deviation from the phenomenon.

    Solution:
    1. Check the USB port of the replacement situation:
    If it replaced, or to plug back into the mouth, or to re-install the touch screen driver. It is noteworthy that, after the touch screen driver Bahrain, the system will automatically enter the correct interface, in this case, we need to use your fingers to recalibrate the touch screen.

    2. Examine the transducer usage:
    Check the medical kiosk touch screen glass around the transducer, whether due to bumps during transport caused by the housing being pinched or damaged situation. If the casing is pressed, just need to re-adjust to the cabinet; if the transducer is damaged, you will need to replace the glass.

    3, check the cleanliness of the vitreous touchscreen:

    Medical kiosks reflect abnormal, it may be because for some reason the touchscreen vitreous fur by other substances resulting from the contact. Because the fur material above the equivalent of finger has been on top of the press, so that the focus can no longer touch the actual manpower. So you want to solve the problem, we need to clean the touch screen vitreous.